Setting up the Core Pro Tool

Attach the supplied OBD cable to the Core Pro using a Torx 10 tool.

Connect the 16-pole OBD connector of the Core Pro to the OBD port of a vehicle and follow the next steps:

👉 After a few seconds, the orange LED, located at the upper left corner of the Ethernet port, will light up constantly: the Core Pro is now ready.

👉 At the same time, the green LED at the top right will flash slowly (900ms on/off): the Core Pro WiFi module is online and ready to connect to a network.

👉 Search for the Core Pro with your PC, laptop, tablet or smartphone via the WiFi settings and connect.

👉 Open the web browser on your PC, laptop, tablet or smartphone and type in the address bar connector.help and connect the Core Pro to the preferred network.

👉 The green LED flashes quickly (300ms on/off): the Wifi Network is set up and the Core Pro is trying to connect.

👉 The green LED will flash even faster (100ms on/off): the Core Pro is connected to the WiFi network and is trying to connect to the Core Diagnostics server.

👉 The green LED is constantly on: the Core Pro is connected to the Core Diagnostics server.

🛑 Note: the Core Pro must be connected to a vehicle in order to establish communication. Without a connected car, the Core Pro will not be able to connect to a network.

Now that the Core Pro is ready for use, go to https://core-diagnostics.obd.help via the browser of your PC, laptop, tablet or smartphone and use the login data supplied to you.

Select the desired service/s in the menu and follow the steps shown on the screen.